FBM230
Schneider Electric
Overview
The FBM230 is a Modbus Master (Serial and TCP/IP) Driver in the Altivar variable speed drive range from Schneider Electric. It controls AC motors from a RANGE (REDUNDANT) supply and is configured through the Altivar parameter set.
Application & Technical Notes
As a modbus master (serial and tcp/ip) driver, the FBM230 is intended for deployment in panel-based control cabinets and machine enclosures where Altivar variable speed drive equipment is installed. It regulates the speed, torque and position of an AC motor to match the process demand while protecting the mechanical train.
Key published characteristics include a RANGE (REDUNDANT) rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Avoid condensation — the rated humidity is 5 to 95% (noncondensing); store and operate the module in a dry, pollution-degree-appropriate enclosure. Maintain clearances for cooling, back up the motor parameter file, and verify the thermal setting matches the driven load. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the FBM230, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the drive rating, supply voltage and motor parameters, and confirm the option cards and communication profile required by the application. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the FBM230?
The FBM230 is a modbus master (serial and tcp/ip) driver in the Altivar variable speed drive range from Schneider Electric. It is described by the manufacturer as: Modbus Master (Serial and TCP/IP) Driver.
What are the key technical ratings of the FBM230?
Its published highlights include RANGE (REDUNDANT). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the FBM230 mounted or installed?
Installation follows the standard Altivar variable speed drive mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the FBM230 compatible with my controller?
It is part of the Altivar variable speed drive family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the FBM230?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
FBM230 | Foxboro ( by Schneider Electric ) | Modbus Master (Serial and TCP/IP) Driver Foxboro ( by Schneider Electric ) Product No. : FBM230 Product Type : Modbus Master (Serial and TCP/IP) Driver The FBM230 is equipped with four ports, each of which can be configured to use either the RS-232, RS-422, or RS-485 physical interface standard Protocols : Modbus RTU protocol (for serial devices) , Modbus ASCII protocol (for serial devices) , Modbus/TCP protocol (for Ethernet devices)
Specifications
| Data | Type and Format : The Modbus Master driver accepts data from devices in big endian or little endian format; data format is configurable. |
|---|---|
| Communication | N/A |
| Dimensions | - Module |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.