DS200IPCSG2ABB
GE
Overview
The DS200IPCSG2ABB is an automation component from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an automation component, the DS200IPCSG2ABB is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the DS200IPCSG2ABB, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for DS200IPCSG2ABB (opens in a new tab)
Frequently Asked Questions
What is the DS200IPCSG2ABB?
The DS200IPCSG2ABB is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the DS200IPCSG2ABB?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the DS200IPCSG2ABB mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the DS200IPCSG2ABB compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the DS200IPCSG2ABB?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
DS200IPCSG2ABB Technical Specifications Manufacturer GE General Electric Series Mark V Part Number DS200IPCSG2ABB Functional Description IGBT P3 Snubber Card Functional Acronym IPCS PCB Coating Normal Coating Functional Revision 1 A About the DS200IPCSG2ABB This DS200IPCSG2ABB printed circuit board product offering from General Electric was designed and manufactured specifically for placement in the Mark V Turbine Control System Series as an IGBT P3 Snubber Board. This DS200IPCSG2A printed circuit board's greater Mark V Series is a rather self-explanatory General Electric Mark product series, as it has a series of specific applications in both the management and control systems of popular and compatible wind, gas, and steam turbine automated drive assemblies.
This DS200IPCSG2ABB PCB's greater Mark V Turbine Control System Series is quite the popular commodity on the general automated industrial marketplace, as it exists as one of the final-developed GE Mark product series to feature the patented Speedtronic control system technology across a range of its products. The Speedtronic technology that this DS200IPCSG2A PCB and its greater Mark V Turbine Control System Series utilizes was first introduced to the automated industrial community with the rollout of the previous Mark I Series in the mid to later 1960s.
Hardware Tips and Specifications This DS200IPCSG2A PCB's functionality is accepted through its normal Mark V Series' installation of a specific series of functionality-inducing hardware components and component specifications. The GE IGBT P3 Snubber Board DS200IPCDG2A features one 4-pin connector and screws for adjusting the insulated bipolar transistor (IGBT). The screws are adjusted by use of a screwdriver. The GE IGBT P3 Snubber Board DS200IPCDG2A is installed in the drive board cabinet in a metal rack structure that has screws holes that will align with the screw holes in the board.
This series is not surrounded by any great amount of originally-pertinent instructional manual materials online for the sake of this DS200IPCSG2A personalized product page.
With this being true, the DS200IPCSG2A functional product number itself can be considered a strong supplementary source of DS200IPCSG2A Board hardware information; coding for specific details in a series of consecutive functional naming segments. For instance, the DS200IPCSG2A functional product number starts off with the dual-functional DS200 series tag delegating this DS200IPCSG2A Board's normal Mark V Series assembly as well as its domestic location of original manufacture. Some of the other relevant hardware details revealed through this DS200IPCSG2A PCB's functional product number include its:
IPCS functional product abbreviation Normal PCB coating style Group 2 Mark V Series product grouping A-rated primary functional revision Before you remove the old board, notice where the board is situated and plan to install the replacement board in the same place. Also notice how the adjustment screws are turned and if possible, plan to adjust the screws on the new board the same way. If that is not possible, you can install the new board and use a trial and error process to duplicate the adjustment until you match the defective board. Also note what cable is attached to the 4-pin connector and plan to connect the same cable on the new board. When you disconnect the cable only grasp it from the connector at the end of the cable. If you pull the cable out by holding the cable portion of it, you might damage the connection between the wires and the connector. Use one hand to hold the board in place and relieve the pressure on the board and with the other hand pull the cable out. Notice any cable routing inside the cabinet and plan to route the cable the same way after the new board is installed.
This DS200IPCSG2A printed circuit board product offering from General Electric is not actually the originally-developed product of its specific Mark V Series functional role; that would be the DS200IPCSG2 parent IGBT Snubber Board missing this DS200IPCSG2A device's A-rated functional product revision.
Reproduced from the manufacturer's published data.