DS200IPCDG1ABA
GE
Overview
The DS200IPCDG1ABA is an IGBT P3 DB SNUBBER CARD from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an igbt p3 db snubber card, the DS200IPCDG1ABA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the DS200IPCDG1ABA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for DS200IPCDG1ABA (opens in a new tab)
Frequently Asked Questions
What is the DS200IPCDG1ABA?
The DS200IPCDG1ABA is an igbt p3 db snubber card from GE. It is described by the manufacturer as: IGBT P3 DB SNUBBER CARD.
What are the key technical ratings of the DS200IPCDG1ABA?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the DS200IPCDG1ABA mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the DS200IPCDG1ABA compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the DS200IPCDG1ABA?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
Specifications Part No.: DS200IPCDG1ABA
Manufacturer: General Electric
Product Type: IGBT P3 DB SNUBBER CARD
Series: Mark V
Overview and Safety Guidelines DS200IPCDG1ABA is an IGBT P3 DB SNUBBER CARD that comes in the Mark V series of General Electric. It consists of one 4-pin connector and seven screws, and this helps adjust the insulated bipolar transistor (IGBT).
Because the drive contains a high level of electric current to power the motor, handling the components in the drive can result in hazardous conditions. As a result, only qualified servicers should carry out the work. Recognizing the dangers of excessive current and comprehending the electric cabling in the drive are two requirements. The servicer must also be familiar with the components of the drive, how to access them, and how the drive is powered. Disconnecting the drive from power is one of the initial steps.
Servicer Requirements and Precautions: Live Power Assumption: The servicer must always assume that the drive has power. The servicer will never be caught off guard and suffer a burn, significant damage, or electric shock if they follow that procedure. If the servicer comes into contact with a live wire or components that have electricity, it could result in death.
Environmental Safety: Because moisture transmits electricity and can pose a dangerous scenario, the servicer must inspect the area around the drive for moisture on the floor. It's critical to keep the floor dry and free of dirt, as well as oil and grease. Because ungrounded electrical wires are a safety hazard, throw them away.
Teamwork and Assistance: It is never a good idea for a servicer to work alone. If an emergency arises, someone should be nearby to contact for assistance. During the replacement procedure, the partner might also assist the servicer.
Reproduced from the manufacturer's published data.