DS200GDPAG1ALF

Overview

The DS200GDPAG1ALF is a High Frequency Power Supply Board from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As a high frequency power supply board, the DS200GDPAG1ALF is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It conditions and distributes the low-voltage supply that powers the controller, I/O and communication modules on the same rack.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Ensure adequate ventilation and do not overload the supply beyond its published current budget; consider redundancy for critical racks. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the DS200GDPAG1ALF, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Match the output voltage and current to the GE product portfolio load and allow headroom for future expansion. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for DS200GDPAG1ALF → (opens in a new tab)

Frequently Asked Questions

Specifications

DS200GDPAG1ALF Technical Specifications OEM General Electric Series Mark V Speedtronic Product Number DS200GDPAG1ALF Functional Acronym GDPA Revision Quantity 3 Revisions Assembly Type Normal Assembly Mark V Series Grouping Group 1 About the DS200GDPAG1ALF The DS200GDPAG1ALF is a High-Frequency Power Supply replacement printed circuit board designed for use in conjunction with GE industrial control systems like the Speedtronic Mark V. The Mark V Series that this DS200GDPAG1ALF High-Frequency Power Supply Board is one of the later Mark Series from General Electric incorporating Speedtronic Technology into its assembly. The Mark V Series that this DS200GDPAG1ALF PCB belongs to has specific applications in the control and management systems of gas, steam, and wind turbines. While this DS200GDPAG1ALF printed circuit board or PCB for short does have its own specific intended series functionality, it is not considered to exist as the original High-Frequency Power Supply Board developed for the Mark V Series. The original High-Frequency Power Supply Board designed and manufactured for the Mark V is the DS200GDPAG1 parent printed circuit board missing all three of this DS200GDPAG1ALF product's significant product revisions. Hardware Tips and Specifications This DS200GDPAG1ALF product offering is a unique Mark V Series printed circuit board in a number of different components and component specifications. The DS200GDPAG1ALF can draw input power from both AC and DC input sources. The 600-700 W high-frequency board has a 27 kHz inverter on its surface, along with a buck driver and an input rectifier. Additionally, the DS200GDPAG1ALF board is protected by several protective circuits, each of which is described in detail in relevant instructional manual materials. Some of these various protective circuits include: The Inverter Overcurrent Circuit The Regulator Overcurrent Circuit The P80 Overvoltage Circuit The Control Voltage Undervoltage Circuit The CVOK Running Signal Circuit Each of these circuits have been named for the specific fault condition that the protect the assembly of the DS200GDPAG1ALF High-Frequency Power Supply from generally. This DS200GDPAG1ALF printed circuit board's internal assembly is additionally populated by a number of standard Mark V Turbine Control System Series voltage-protecting hardware components, such as rectifiers, diodes, capacitors, and more. The DS200GDPAG1ALF is designed to operate at an input range of 80-132 VAC or 105-140 VDC. Operation at lower input voltages (both AC and DC) is possible, but reducing loading may be required. DS200GDPAG1ALF board operation below 102 VAC may result in thermal damage if the board is fully loaded. The DS200GDPAG1ALF includes multiple TP test points, two stab-on connectors, and four GXPL connectors. Stab-on connectors are used as a shield ground and as an input to control the assembly backplane. This DS200GDPAG1ALF board can mount onto a drive mounting plate. Alternatively, it can mount onto the drive cabinet. Let your system configuration lead you in how you install the board. Installation instructions are included within GE manuals. Part Number: DS200GDPAG1ALF Manufacturer: General Electric Series: EX2000 Product Type: High Frequency Power Supply Board Temperature: 0 to 60oC (32 to 149 oF) Availability: In Stock Country of Manufacturer: United States (USA) Functional Description DS200GDPAG1ALF is a High Frequency Power Supply Board developed by General Electric. It is a part of EX2000 excitation system. The High Frequency Power Supply Board boast a power output ranging from 600 to 700 watts (W). Possesses the capability to draw input power from both alternating current (AC) and direct current (DC) sources, ensuring adaptability to diverse operational environments and requirements. Key Components and Functions

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1