CI853K01
GE
Overview
The CI853K01 is an automation component from GE. Article number 3BSE018103R1 (CI853K01).
Application & Technical Notes
As an automation component, the CI853K01 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Avoid condensation — the rated humidity is 5 to 95 %, non-condensing; store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the CI853K01, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for CI853K01 (opens in a new tab)
Frequently Asked Questions
What is the CI853K01?
The CI853K01 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the CI853K01?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the CI853K01 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the CI853K01 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the CI853K01?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
General info
Dimensions
| Note | Width 59 mm (2.3 in.) Height 185 mm (7.3 in.) Depth 127.5 mm (5.0 in.) Weight (including base) 700 g (1.5 lbs) Environment and certification Temperature, Operating 0 to +55 °C (+32 to +131 °F) Temperature, Storage -40 to +70 °C (-40 to +158 °F) Altitude 2000 m according to IEC/EN 61131-2 Pollution degree Degree 2 according to IEC/EN 61131-2 Corrosion protection G3 compliant to ISA 71.04 Relative humidity 5 to 95 %, non-condensing Protection class IP20 according to EN60529, IEC 529 CE- marking Yes Electrical Safety UL 61010-1, UL 61010-2-201 Hazardous location UL 60079-15, cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X Marine certificates DNV-GL, (Pending: ABS, BV, LR) RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) WEEE compliance DIRECTIVE/2012/19/EU Communication protocol MODBUS TCP Master or slave Master/Slave Number of channels 1 channel Transmission speed 10/100 Mbit/s (Ch1) Line redundancy No Module redundancy Yes Hot Swap Yes Used together with HI Controller Yes |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.