BMXDDO1602
Schneider Electric
Overview
The BMXDDO1602 is a Discrete output module in the Modicon X80 range from Schneider Electric. It is engineered for industrial automation duties within the the Schneider Electric automation portfolio ecosystem.
Application & Technical Notes
As a discrete output module, the BMXDDO1602 is intended for deployment in panel-based control cabinets and machine enclosures where the Schneider Electric automation portfolio equipment is installed. It drives actuators, relays, valves and indicators from controller commands, acting as the actuation layer between logic and the machine.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Avoid condensation — the rated humidity is 5…95 % at 55 °C without condensation; store and operate the module in a dry, pollution-degree-appropriate enclosure. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the BMXDDO1602, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your the Schneider Electric automation portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the BMXDDO1602?
The BMXDDO1602 is a discrete output module in the Modicon X80 range from Schneider Electric. It is described by the manufacturer as: Discrete output module.
What are the key technical ratings of the BMXDDO1602?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the BMXDDO1602 mounted or installed?
Installation follows the standard the Schneider Electric automation portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the BMXDDO1602 compatible with my controller?
It is part of the the Schneider Electric automation portfolio family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the BMXDDO1602?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
BMXDDO1602 discrete output module X80 - 16
Main
| Range of product Modicon X80 | Product or component type Discrete output module Discrete output number 16 conforming to IEC 61131-2 Discrete output type Solid state Discrete output logic Positive Discrete output voltage 24 V 19...30 V DC Discrete output current 0.5 A |
|---|
Complementary
| Note | Current per channel 0.625 A Maximum current per module 10 A Maximum leakage current 0.5 mA at state 0 Maximum voltage drop <1.2 V at state 1 Insulation resistance > 10 MOhm 500 V DC Power dissipation in W 4 W Response time on output 1.2 ms Paralleling of outputs Yes : 2 maximum Typical current consumption 79 mA at 3.3 V DC MTBF reliability 410000 H Protection type External fuse reverse polarity protection short-circuit protection overload protection overvoltage protection Output overload protection With electronic circuit breaker 1.5 In < Id < 2 In With current limiter Output overvoltage protection With transil diode Output short-circuit protection With 2 A external fuse Reverse polarity protection Reverse mounted diode Voltage detection threshold < 14 V DC preactuator fault > 18 V DC preactuator at state 0 Maximum tungsten load 6 W Switching frequency 0.5/LI² Hz Load impedance ohmic > 48 Ohm Status LED 1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O Net weight 0.12 kg |
|---|
Environment
| IP degree of protection IP20 | Directives 2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility Dielectric strength 1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic Vibration resistance 3 gn Shock resistance 30 gn |
|---|---|
| Ambient air temperature for | storage -40…85 °C |
| Ambient air temperature for | operation 0…60 °C Relative humidity 5…95 % at 55 °C without condensation |
| Operating altitude 0...2000 m | 2000...5000 m with derating factor |
Packing Units
| Unit Type of Package 1 PCE | Number of Units in Package 1 1 Package 1 Height 5.600 cm Package 1 Width 11.000 cm Package 1 Length 12.000 cm Package 1 Weight 145.000 g |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.