BMXDDM16022
Schneider Electric
Overview
The BMXDDM16022 is a Discrete I/O module in the Modicon X80 range from Schneider Electric. It is engineered for industrial automation duties within the the Schneider Electric automation portfolio ecosystem.
Application & Technical Notes
As a discrete i/o module, the BMXDDM16022 is intended for deployment in panel-based control cabinets and machine enclosures where the Schneider Electric automation portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed Schneider Electric platform.
Key published characteristics include a 24V DC rating, an operating temperature range of 32…140 °F (0…60 °C), din rail mounted mounting. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (32…140 °F (0…60 °C)); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40…185 °F (-40…85 °C). Avoid condensation — the rated humidity is 5…95 % 131 °F (55 °C) without condensation; store and operate the module in a dry, pollution-degree-appropriate enclosure. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the BMXDDM16022, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your the Schneider Electric automation portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the BMXDDM16022?
The BMXDDM16022 is a discrete i/o module in the Modicon X80 range from Schneider Electric. It is described by the manufacturer as: Discrete I/O module.
What are the key technical ratings of the BMXDDM16022?
Its published highlights include 24V DC, operating temperature 32…140 °F (0…60 °C). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the BMXDDM16022 mounted or installed?
It uses DIN rail mounted. Follow the manufacturer mounting and torque guidance and observe clearance, grounding and ventilation requirements.
Is the BMXDDM16022 compatible with my controller?
It is part of the the Schneider Electric automation portfolio family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the BMXDDM16022?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The BMXDDM16022 from Schneider Electric is a discrete mixed input/output module designed for versatile applications in Modicon systems. This module provides 8 inputs and 8 outputs, operates at 24V DC, and ensures fast response times of just 4 ms, making it effective for reliable system interactions.
Complementary
| Input compatibility | With 2-wire/3-wire proximity sensors IEC 60947-5-2 With 2-wire/3-wire proximity sensors IEC 61131-2 type 3 |
|---|---|
| Sensor power supply | 19...30 V |
| Current state 1 guaranteed | >= 3 mA |
| Current state 0 guaranteed | <= 1.5 mA |
| Current per channel | 0.625 A |
| Maximum current per module | 5 A |
| Maximum leakage current | 0.5 mA at state 0 |
| Maximum voltage drop | <1.2 V at state 1 |
| Input impedance | 6800 Ohm Insulation resistance > 10 MOhm 500 V DC |
| Power dissipation in W | 3.7 W DC typical response time 4 ms DC maximum response time 7 ms Response time on output 1.2 ms |
| Paralleling of outputs | Yes : 2 maximum |
| Typical current consumption | 79 mA 3.3 V DC 59 mA 24 V DC |
| Current consumption | <= 111 mA 3.3 V DC <= 67 mA 24 V DC |
| MTBF reliability | 450000 H |
| Protection type | 1 external fuse per group of input channel 0.5 A fast blow overvoltage protection on output reverse polarity protection on input reverse polarity protection on output |
| Output overload protection | With current limiter With electronic circuit breaker 1.5 In < Id < 2 In |
| Output overvoltage protection | With transil diode |
| Output short-circuit protection | With 2 A external fuse |
| Reverse polarity protection | Reverse mounted diode Voltage detection threshold < 14 V DC preactuator fault < 14 V DC sensor fault > 18 V DC preactuator OK > 18 V DC sensor OK |
| Maximum tungsten load | 6 W |
| Switching frequency | 0.5/LI² Hz Maximum overload time 15 ms |
| Load impedance ohmic | >= 48 Ohm |
| Status LED | 1 LED (Green) module operating (RUN) 1 LED per channel (Green) channel diagnostic 1 LED (Red) module error (ERR) 1 LED (Red) module I/O |
| Net Weight | 0.254 lb(US) (0.115 kg) |
Environment
| IP Degree of Protection | IP20 |
|---|---|
| Directives | 2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility |
| Dielectric strength | 1500 V AC 50/60 Hz 1 minute, output/ground 1500 V AC 50/60 Hz 1 minute, output/internal logic 1500 V AC 50/60 Hz 1 minute, primary/secondary 500 V DC 1 minute, between group of inputs and outputs |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) |
| Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
| Relative humidity | 5…95 % 131 °F (55 °C) without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) 2000...5000 m with derating factor |
Ordering and shipping details
| Category | US1PC3418160 |
|---|---|
| Discount Schedule | PC34 GTIN 3595863910506 |
| Returnability | Yes |
| Country of origin | FR |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Nbr. of units in pkg. | 1 |
| Package 1 Height | 2.165 in (5.500 cm) |
| Package 1 Width | 4.331 in (11.000 cm) |
| Package 1 Length | 4.606 in (11.700 cm) |
| Package weight(Lbs) | 5.009 oz (142.000 g) |
Description
| Note | The BMXDDM16022 represents a discrete mixed I/O module within Schneider Electric’s Modicon series. This device is built to offer 8 input channels alongside 8 output channels, all operating at a standard input voltage of 24V DC. It is engineered with solid-state outputs that enable precise control and quick action in various applications. Professionals will find that this module boasts a response time of only 4 milliseconds, facilitating swift data processing that can enhance system performance. The input impedance measures at 6800 Ohms, ensuring compatibility with various control systems. Additionally, it achieves high insulation resistance at 10 MOhm, contributing to overall system reliability. With a power dissipation rate of 3.7 Watts, it maintains effective operational efficiency, particularly within its specified working temperature range of -20°C to 60°C. Designed for DIN rail mounting, the BMXDDM16022 allows for easy installation in various settings. Equipped with Modbus communication protocol, this module integrates smoothly into existing networks, enabling efficient data communication. Its protection rating of IP20 means it is suitable for general indoor applications, providing basic protection against dust and contact. Overall, the BMXDDM16022 is an important addition for those requiring reliable mixed I/O capabilities in their automation systems. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.