BMXDAI1604
Schneider Electric
Overview
The BMXDAI1604 is a Discrete input module in the Modicon X80 range from Schneider Electric. It is engineered for industrial automation duties within the the Schneider Electric automation portfolio ecosystem.
Application & Technical Notes
As a discrete input module, the BMXDAI1604 is intended for deployment in panel-based control cabinets and machine enclosures where the Schneider Electric automation portfolio equipment is installed. It converts field signals (sensors, switches, transmitters) into the digital or analogue values the controller processes, forming the acquisition layer of the automation scheme.
Key published characteristics include capacitive signal handling, a 100-120 VAC rating, an operating temperature range of 32…140 °F (0…60 °C). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (32…140 °F (0…60 °C)); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40…185 °F (-40…85 °C). Avoid condensation — the rated humidity is 5…95 % 131 °F (55 °C) without condensation; store and operate the module in a dry, pollution-degree-appropriate enclosure. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the BMXDAI1604, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your the Schneider Electric automation portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the BMXDAI1604?
The BMXDAI1604 is a discrete input module in the Modicon X80 range from Schneider Electric. It is described by the manufacturer as: Discrete input module.
What are the key technical ratings of the BMXDAI1604?
Its published highlights include 100-120 VAC, operating temperature 32…140 °F (0…60 °C). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the BMXDAI1604 mounted or installed?
Installation follows the standard the Schneider Electric automation portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the BMXDAI1604 compatible with my controller?
It is part of the the Schneider Electric automation portfolio family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the BMXDAI1604?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The BMXDAI1604 digital input module from Schneider Electric's Modicon series is designed to facilitate reliable input processing. Capable of handling 16 capacitive digital inputs, this device operates with a voltage range of 100-120 VAC, supporting both 2-wire and 3-wire proximity sensors for versatile sensor compatibility.
Complementary
| Input compatibility | 2-wire proximity sensor IEC 60947-5-2 2-wire proximity sensor IEC 61131-2 type 3 |
|---|---|
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47…63 Hz |
| Sensor power supply | 85...132 V |
| Current state 1 guaranteed | >= 2.5 mA |
| Current state 0 guaranteed | <= 1 mA |
| Input impedance | 13000 Ohm Insulation resistance > 10 MOhm 500 V DC |
| Power dissipation in W | 3.8 W AC activation response time 10 ms AC deactivation response time 20 ms |
| Typical current consumption | 76 mA 3.3 V DC |
| MTBF reliability | 1120000 H |
| Protection type | 1 external fuse per group of channel 0.5 A fast blow Voltage detection threshold < 40 V AC sensor fault > 82 V AC sensor OK |
| Status LED | 1 LED (Green) module operating (RUN) 1 LED per channel (Green) channel diagnostic 1 LED (Red) module error (ERR) 1 LED (Red) module I/O |
| Net Weight | 0.254 lb(US) (0.115 kg) |
Environment
| IP Degree of Protection | IP20 |
|---|---|
| Directives | 2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility |
| Dielectric strength | 1500 V AC 50/60 Hz 1 min |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) |
| Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
| Relative humidity | 5…95 % 131 °F (55 °C) without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) 2000...5000 m with derating factor |
Ordering and shipping details
| Category | US1PC3418160 |
|---|---|
| Discount Schedule | PC34 GTIN 3595863909999 |
| Returnability | Yes |
| Country of origin | FR |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Nbr. of units in pkg. | 1 |
| Package 1 Height | 2.244 in (5.700 cm) |
| Package 1 Width | 4.488 in (11.400 cm) |
| Package 1 Length | 4.724 in (12.000 cm) |
| Package weight(Lbs) | 5.220 oz (148.000 g) |
Description
| Note | The BMXDAI1604 module acts as a digital input interface from Schneider Electric within the Modicon series. With the capacity to manage 16 inputs, this module utilizes capacitive technology for effective signal processing. It supports both 2-wire and 3-wire proximity sensors, providing flexibility in sensor applications. This module requires an input voltage of 100-120 VAC and has an input impedance of 13,000 Ohm. It is designed for operation across 50/60 Hz frequencies, which aligns with standard electrical systems. Power consumption is relatively low, ensuring efficient use of energy at less than or equal to 3.8 watts. The device is built with IP20 protection to prevent ingress of solid objects, ensuring adequate safety in typical installation environments. Furthermore, the BMXDAI1604 module complies with several industry standards, including CE, CSA, UL, RCM, and EAC certifications, confirming its quality and safety. With a remarkable mean time between failures (MTBF) reliability rating of 1,504,958 hours, this digital input module is well-suited for demanding applications. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.