BMXCPS4002S
Schneider Electric
Overview
The BMXCPS4002S is a Power supply module in the Modicon X80 range from Schneider Electric. It is engineered for industrial automation duties within the the Schneider Electric automation portfolio ecosystem.
Application & Technical Notes
As a power supply module, the BMXCPS4002S is intended for deployment in panel-based control cabinets and machine enclosures where the Schneider Electric automation portfolio equipment is installed. It conditions and distributes the low-voltage supply that powers the controller, I/O and communication modules on the same rack.
Key published characteristics include an operating temperature range of -13…140 °F (-25…60 °C). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (-13…140 °F (-25…60 °C)); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40…185 °F (-40…85 °C). Avoid condensation — the rated humidity is 5…95 % 131 °F (55 °C) without condensation; store and operate the module in a dry, pollution-degree-appropriate enclosure. Ensure adequate ventilation and do not overload the supply beyond its published current budget; consider redundancy for critical racks. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the BMXCPS4002S, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the output voltage and current to the the Schneider Electric automation portfolio load and allow headroom for future expansion. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the BMXCPS4002S?
The BMXCPS4002S is a power supply module in the Modicon X80 range from Schneider Electric. It is described by the manufacturer as: Power supply module.
What are the key technical ratings of the BMXCPS4002S?
Its published highlights include operating temperature -13…140 °F (-25…60 °C). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the BMXCPS4002S mounted or installed?
Installation follows the standard the Schneider Electric automation portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the BMXCPS4002S compatible with my controller?
It is part of the the Schneider Electric automation portfolio family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the BMXCPS4002S?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
redundant power supply module, Modicon X80, 100 to 240V AC, safety
Main
| Range of Product | Modicon X80 Product or Component Type Power supply module backplane compatibility All backplane advanced diagnostics available via network Redundancy information Redundancy test Temperature sensing Remaining lifetime Uptime duration Primary Voltage 100...240 V Supply circuit type AC |
|---|---|
| Secondary power | 15 W 3.3 V DC -13…140 °F (-25…60 °C) I/O module logic power supply 40 W 24 V DC -13…140 °F (-25…60 °C) I/O module power supply and processor if 3.3 V not loaded |
Complementary
| Note | Primary voltage limit 85...264 V |
|---|---|
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47…63 Hz Apparent power 0.13 kVA |
| Input current | 0.55 A 230 V 1.1 A 115 V |
| Inrush current | 30 A 115 V 60 A 230 V |
| I²t on activation | 1 A².s 115 V 4 A².s 230 V |
| It on activation | 0.1 A.s 115 V 0.15 A.s 230 V |
| MTBF reliability | 792000 H |
| Protection type | Internal fuse not accessible primary circuit |
| Overload protection secondary circuit | Overvoltage protection secondary circuit Short-circuit protection secondary circuit |
| Current at secondary voltage | 4.5 A 3.3 V DC I/O module logic power supply 1.67 A 24 V DC I/O module power supply and processor |
| Maximum power dissipation in W | 8.5 W |
| Status LED | 1 LED (Green) presence of voltages (OK) 1 LED (Green) redundancy OK 1 LED (Green) power supply status |
| Control Type | RESET push-button cold restart |
| Electrical connection | 1 connector 2 alarm relay 1 connector 5 line supply, protective earth Insulation resistance >= 100 MOhm primary/ground >= 100 MOhm primary/secondary |
| Net Weight | 1.12 lb(US) (0.51 kg) |
Environment
| Immunity to microbreaks | 10 ms |
|---|---|
| Dielectric strength | 1500 V primary/secondary I/O module logic power supply 1500 V primary/secondary I/O module power supply and processor 2300 V primary/secondary sensor power supply 1500 V primary/ground 500 V 24 V sensor output/ground |
| Vibration resistance | 3 gn |
| Shock resistance | 15 gn |
| IP Degree of Protection | IP20 |
| Directives | 2014/30/EU - electromagnetic compatibility 2006/42/EC - machinery 2014/34/EU - ATEX directive |
| Product certifications | CE UL CSA RCM EAC |
| Merchant Navy | ATEX zone 2/22 IECEx zone 2/22 TÜV |
| Standards | EN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 |
| CSA C22.2 No 61010-2-201 | IACS E10 |
| EN/IEC 61000-6-5, interface type 1 and type 2 | EN/IEC 61850-3, location G EN/IEC 60079-0 |
| Environmental characteristic | Hazardous location class I division 2 Gas resistant class Gx ISA S71.04 Gas resistant class 3C4 IEC 60721-3-3 Dust resistant class 3S4 IEC 60721-3-3 Sand resistant class 3S4 IEC 60721-3-3 Salt resistant level 2 IEC 68252 Mold growth resistant class 3B2 IEC 60721-3-3 Fungal spore resistant class 3B2 IEC 60721-3-3 |
| Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) |
| Ambient air temperature for operation | -13…140 °F (-25…60 °C) |
| Relative humidity | 5…95 % 131 °F (55 °C) without condensation |
| Protective treatment | Conformal coating |
| Operating altitude | 0...6561.68 ft (0...2000 m) 2000...5000 m with derating factor |
Ordering and shipping details
| Category | US1PC3418161 |
|---|---|
| Discount Schedule | PC34 GTIN 3606481204950 |
| Returnability | Yes |
| Country of origin | ID |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Nbr. of units in pkg. | 1 |
| Package 1 Height | 3.54 in (9.000 cm) |
| Package 1 Width | 7.09 in (18.000 cm) |
| Package 1 Length | 9.84 in (25.000 cm) |
| Package weight(Lbs) | 21.799 oz (618.000 g) |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 11.81 in (30.000 cm) |
| Package 2 Width | 11.81 in (30.000 cm) |
| Package 2 Length | 15.75 in (40.000 cm) |
| Package 2 Weight | 9.914 lb(US) (4.497 kg) |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.