21022-30-10-017-03
Bently Nevada
Overview
The 21022-30-10-017-03 is a Dual Axial Probe Housing Assembly from Bently Nevada. It is part of Bently Nevada's industrial automation product portfolio.
Application & Technical Notes
As a dual axial probe housing assembly, the 21022-30-10-017-03 is intended for deployment in panel-based control cabinets and machine enclosures where the Bently Nevada product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed Bently Nevada platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the 21022-30-10-017-03, distinguish three supply tiers: (1) genuine Bently Nevada stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your Bently Nevada product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for 21022-30-10-017-03 (opens in a new tab)
Frequently Asked Questions
What is the 21022-30-10-017-03?
The 21022-30-10-017-03 is a dual axial probe housing assembly from Bently Nevada. It is described by the manufacturer as: Dual Axial Probe Housing Assembly.
What are the key technical ratings of the 21022-30-10-017-03?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the 21022-30-10-017-03 mounted or installed?
Installation follows the standard Bently Nevada product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the 21022-30-10-017-03 compatible with my controller?
It belongs to Bently Nevada's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the 21022-30-10-017-03?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
Manufacturer : Bently Nevada
Product No. :21022-30-10-017-03
Product Type : Dual Axial Probe Housing Assembly
Made in U.S.A
Probe Option, with Connector: 30 = 3300 XL 11 mm probe, Multiple approvals Probe Cable Length Option 10 = 1.0 metre (39 in)
3300 XL 11 mm Probe not available with 0.5 meter Probe Cable Length.
Probe Penetration Option： 017= 1.7 in
Fittings Option： 03= Two cable seal grips with grommets for cable sizes 1/8-in to 3/16-in, 1/4-in to 5/16-in, 5/16-in to 3/8-in; two 3/4-14 to 1/2-14 NPT reducers Fittings option are supplied as a kit and are not installed when the housing is shipped.
The 21022 Dual Axial Probe Housing Assembly consists of two proximity probes installed in an externally mounted protective enclosure. It is intended for mounting on the end of a machine nearest the thrust bearing to allow both probes to observe the end of the shaft for axial thrust position movement. The enclosure mounts on the machine case using four standard machine screws. The probes are mounted in sleeve/adapter assemblies, which are installed directly onto the machine case through two 3/4-in NPT threaded holes. The dual axial position housing meets the American Petroleum Institute’s (API) 670 Standard for axial thrust position transducer housings. The external mounting allows probe adjustments from outside the machine, while protecting the proximity probes, probe leads, and extension cables from dust, splashing liquid, or other environmental factors. A removable cover on the enclosure provides access for setting the probe gaps.
21022 Aluminum alloy housing (sand cast, 0.3% copper free) with sleeves fabricated from 304 stainless steel
3.6 kg (8 lb)
Reproduced from the manufacturer's published data.