07KT93
ABB
Overview
The 07KT93 is an automation component from ABB. It is part of ABB's industrial automation product portfolio.
Application & Technical Notes
As an automation component, the 07KT93 is intended for deployment in panel-based control cabinets and machine enclosures where the ABB product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed ABB platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the 07KT93, distinguish three supply tiers: (1) genuine ABB stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your ABB product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for 07KT93 (opens in a new tab)
Frequently Asked Questions
What is the 07KT93?
The 07KT93 is an automation component from ABB. It belongs to ABB's automation product portfolio.
What are the key technical ratings of the 07KT93?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the 07KT93 mounted or installed?
Installation follows the standard ABB product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the 07KT93 compatible with my controller?
It belongs to ABB's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the 07KT93?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
ABB 07 KT 93 Central Processing Unit 07KT93
The high-speed counter used in the basic unit 07 KT 93 works independently of the user program and is therefore able to response quickly to external signals. Features · The counting frequency is 10 kHz max. The counter counts the 0->1 edges at terminal 02 (also designated as E 62,00).
Enabling/disabling of the counting procedure using the internal variable A 63,14 in the user program: A63,14 = O The internal variable A 63,13 = 1 enables the counting procedure, whereas A 63,13 = 0 disables it. A63,14 = 1 Signal 1 at terminal 03 (also designated as E 62,01) enables the counting procedure, whereas signal 0 disables it. A 63,13 is without effect. Note: The dead time may be 0...1.5 ms. · Setting the counter in the user program: to the value contained in the internal word variable AW 06,15 using the internal variable A 63,15 = 1. Note: If the internal variable A 63,15 = 1 is present during several processing cycles, the processor sets the counter at the program end in each case. During the remaining time of the processing cycle, the counter counts pulses at terminal 02. · The counter content can be read via the internal variable EW 06,15. · Zero-crossing message (signal changes from 0 to 1 when the counter contents changes from -1 to 0): always via the internal variable E 63,13, at the terminal 36 (also designated as A 62,00) only, if the internal variable A 63,14 = 1 is set. Note: The reaction time may be 0...1.5 ms. The direct control of the output A 62,00 from the user program is disabled by A 63,14 = 1. The zero-crossing message is cancelled when the counter is set. · Fast input of digital signals into the user program with a delay of < 0.02 ms: Terminal 02 (also designated as E 62,00): Internal variable E 63,14 Terminal 03 (also designated as E 62,01): Internal variable E 63,15
Reproduced from the manufacturer's published data.